Monthly Archives: January 2013

TX-NR5010

TX-NR5010- Stunning new flagship model:
ADVANCED FEATURES
http://bit.ly/TXNR5010
• THX® Ultra2 Plus™ Certified
• Massive Toroidal Transformer and Two Separate Transformers for Audio and Video Processing
• Anti-Vibration Construction with Separate Aluminum Side Panels
• VLSC™ (Vector Linear Shaping Circuitry)
• High-Quality HQV® Vida™ VHD1900 Video Processor
• HDMI® Video Upscaling to 4K with Qdeo™ Technology by
Marvell
• ISF (Imaging Science Foundation) Video Calibration for Optimal Video Performance
• DTS Neo:X™, Audyssey DSX®, and Dolby® Pro Logic® IIz for Expanded Surround Channels
• Input Source Preview with InstaPrevue™ Technology
• Audyssey MultEQ® XT32 for Room Acoustic Correction
• Internet Radio and Cloud Music Streaming Service
Connectivity (Pandora®, Rhapsody, Slacker™, SIRIUS XM
Internet Radio®, Last fm, MP3tunes, Spotify, AUPEO!, vTuner)*1
• Supports Onkyo Remote Apps for iPod touch®/iPhone®*2 and Android Phone*3
• Zone 2 HDMI Output for HD Video in a Second Room
• Digital Crossover Processing Network to Cancel Crossover
Interference

*1 Availability of services depends on region. Some services may require a firmware update. Availability of third-party services advertised here is accurate at the time of printing, but may be subject to change without notice. *2 Compatible with iPod touch (3rd generation or later) and iPhone 3GS or later. All models require iOS 4.2 or later. *3 Requires Android OS 2.1 or later

Advertisements

Factory Reset for 2012 Models

Having  issues with the settings on the receivers?

Try doing a factory reset. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS.  YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY.

 

To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the “CBL/SAT” button while doing that press the “STANDBY/ON” button.  You will see the word “Clear” in the display screen and the receiver will go into standby mode. Once the receiver goes into standby mode turn it back on and go through the setup menu for all custom settings.

 

If you are still experiencing the same issue(s), Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation below.  We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.